Crane boards KS, TSA, PZKB

Crane control boards for direct and alternate current

The crane boards control the electric motors of the lifting mechanisms or when moving gantry and traveling cranes. With the help of crane boards starting, reversing, braking are provided as well as speed control of the motor and the maximum, zero, final protection of the electric drive.

Crane control boards are manufactured in an open form. They have a vertical frame on which communication apparatus, blocks and panels for equipment are installed. Thanks to the front connection of the wires there is no need to have a passage from the rear to the crane panel. The wires of the main circuits, located externally, are connected directly to the terminals of the required apparatus. Protective panels are produced in closed form (box), both for internal and external mounting.

Direct current

Rated current, (А)
Voltage, (V)
Alternate current
Rated current, (А)
Voltage, (V)
P-160
160
110/220/440
К-63
63
380
P-250
250
110/220/440
К-160
160
380
P-630
630
110/220/440
К-250
250
380
PS-160
160
110/220/440
КС-160
160
380
PS-250
250
110/220/440
КС-250
250
380
PS-630
630
110/220/440
КС-400
400
380
PMS-160
160
220/440
ДК-63
2х63
380
PMS-250
250
220/440
ДК-160
2х160
380
DP-160
2х160
110/220/440
ДК-250
2х250
380
DP-250
2х250
110/220/440
ДКС-160
2х160
380
DP-630
2х630
110/220/440
ДКС-250
2х250
380
DPS-160
2х160
110/220/440
ДКС-400
2х400
380
DPS-250
2х250
110/220/440
ДТА-160
2х160
380
DPS-630
2х630
110/220/440
ДТА-250
2х250
380
UVK-3-16
16
220/440
ТА-160
160
380
UVK-3-50
50
220/440
ТА-250
250
380
UVK-3-100
100
220/440
ТС(Д)-160
160(2х160)
380
 * PZKB-160,250
 160,250,400
 380
ТС(Д)-250
250(2х250)
380

* Crane input and protection boards PZKB-160, PZKB-250, PZKB-400 (PZK, PZKN, PVZ)

Крановые панели управления постоянного и переменного тока Крановые панели управления постоянного и переменного тока

Modernized heavy duty boards KS, DK, DKS, P, PS, DP, DPS.

Panels that have been upgraded for heavy duty modes: KS, DK, DKS, P, PS, DP, DPS. Electrical crane diagrams for these boards are made on the direct current contactors of KTPV, KPD type. There is a number of disadvantages in contactors of this type, on the contrary of the models produced in Europe. The data is highlighted in the table:

Characteristic

Contactor KTPV-624

Contactor CRLI250

Rated current, А

250

250

Size

380х208х237

168х200х198

Weight, kg

29

6,2

The need for a dielectric plate

Yes

No

Need for adjustment

Yes

No

Electric durability, 106 cycles in the AS3 mode

0,2

1,2

Mechanical durability, 106 cycles

10

10

Power contacts

copper

with silver tapes

Note: Electrical and mechanical durability is constant for the entire current range of contactors such as CRLI

Also, the CRLI contactors have an extensive range of rated currents, thereby allowing you to select the option at the best price for a particular engine.

There are programmable relays (such as Zelio Logic) installed in a complex with contactors on the panel of the modernized type of control. This allows you to accurately adjust the time required to accelerate the engine (the heating becomes smaller, the resource increases, then the acceleration will be smooth). Thereby fewer intermediate relays are used, increasing the overall reliability of the circuit.

The control voltage and marking of the terminal blocks on the modernized boards fully meet the standards. Therefore it is possible to make the minimum-schedule.

Our company has experience in the use of boards for heavy-duty cranes such as bridge grabbing crane with a lifting capacity of 5 tons. We have a standard electrical circuit in contactors with a constant current of KTPV, KPD type. Crane passport PV = 40%, but in reality it reaches 75%.

There were problems with the electrical engineering of the crane at least twice a week (the contacts were punctured, the block-contacts were off). Therefore, in April 2008, the management control decided to modernize the electrical circuit by using contactors CRLI.

When working with a crane it was necessary to replace the contacts after 12 months, and during this time there was no failure of the board.

After replacing the chains electrical apparatus for the crane control and using upgraded boards, the warranty period for the installed equipment became to be 1 year.

Крановая панель  Крановая панель                           

 

Photo of control boards (contactors CRLI) of a special traveling crane with a lifting capacity of 80 / 20 tons,

 modernized by specialists of "Krankomplekt" in the room

Kudankulam NPP, Tamil Nadu, India.

Callback request